EN | ÖÐÎÄ

Products Overview



JB COMPRESSOR SERVICES SDN BHD
No. 56, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-3554333
+607-3547990
+607-6651699
+6012-7271200

Flow / consumption sensor Inline type

Flow / consumption sensor  Inline type Energy Saving Product And Accessories


CS-iTEC flow / consumption sensor S 420

The new affordable flow sensor S 420 work according to the approved thermal mass flow principle. As a result actual mass flow or standard volumetric flow is measured and displayed without the need of temperature or pressure compensation. Flow sensor S 420 is available with and without display.

Due to the compact design of flow sensor S 420 it is possible to monitor all compressed air systems from the compressor to the smallest compressed air tool (DN 15 to DN 50) in terms of flow rate and compressed air consumption.

For larger pipe diameters (DN 50 to DN300) an insertion type flow sensor  S 400 is available. Apart from compressed air also other gases like N2, O2, Ar, N2O, and CO2 can be measured. The installation of the flow sensor S 420 can be done easily and quickly. A special advantage is the removable measuring device. The measuring device can be demounted quickly and easily for calibration purposes without removing the complete measuring section.

Intelligent solutions for accurate flow measurements for compressed air and gases

Application

s420_2

Stationary use

Due to the economic solution with S 420 the consumption measurement of compressed air and process gases in branch pipes becomes attractive. This allows the monitoring of gas consumption to different production units.
 

s420_1

Mobile use

The compact design and easy use allows the measurement of compressed air / gas at machine level. In the picture beside S 420 is connected to the air supply of a machine.

Product features

  • Easy and affordable installation
  • Units freely selectable via keypad m³/h, m³/min, l/min, l/s, kg/h, kg/min, kg/s, cfm
  • Compressed air counter up to 1,999,999,999 m³. Resettable to “zero” via keypad
  • Analogue output 4…20 mA, pulse output (galvanically separated)
  • High measuring accuracy also in the lower measuring range (ideal for leakage measurement)
  • Negligibly small loss of pressure
  • Thermal mass flow principle, no additional pressure and temperature measurement necessary
  • Gas types adjustable via software (N2, O2, CO2, N2O, Ar)

Technical data

Measured unit m³/h, m³/min, l/min, cfm, m/s, kg/min, kg/h, kg/s
(Reference standard can be programmed)
Default values:
* Air: Ps=1000 hPa, Ts=20 °C
all other gases: Ps=1013 hPa, Ts=0°C
Accuracy ± (2% of measured value + 0.3% full scale)
Temperature drift: 0.05 % / K
Pressure drift: 0.5 % / MPa
Stated accuracy at: Ambient/process temperature 23 °C ± 3°C
Ambient/process humidity < 90 %, no condensation
Process pressure at 0.6 MPa
Process connection: R thread(ISO 7-1),
Flange EN 1092-1, ANSI / B16.5, JIS B2220
Principle of measurement: Thermal mass flow
Sensor: Glass coated resistive sensor
Measuring Medium: Air, N2, O2, Ar, N2O, CO2
Operating temperature: -30 to 50 °C
-10 to 50 °C with local display
Operating pressure: up to 1.6 Mpa
up to 4.0 MPa (Optional)
Analogue output: Signal: 4 to 20 mA
Scaling: 0 to maximum volume flow
Accuracy: 0.06 mA
Pulse output: 1 pulse per consumption unit, insulated
switch output, max. 30 VDC, 20 mA
Power supply: 12-30 VDC, 2.4W
Display: 128 x 64 pixel, with backlight
Material: Measuring section:
Stainless steel 1.4404 (sus 316L)

* Ps: Standard pressure Ts: Standard temperature


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version