EN | 中文

Products Overview



JB COMPRESSOR SERVICES SDN BHD
No. 56, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-3554333
+607-3547990
+607-6651699
+6012-7271200

Dew Point Sensor

Dew Point Sensor Energy Saving Product And Accessories


CS-iTEC dewpoint sensor/ dew point transmitter S 201

The measured dew point is output via a 4-20 mA signal output. The integrated display shows online measurement values and alarm status. One alarm can be programmed which will activate a relay.

S 201 features a complete dew point meter with sensor, display, keyboard and alarm.

Sensor parameters such as analogue output scaling, alarm values, units etc, can be easily changed by using CS-iTEC service kit. This kit is used to connect the sensor to a PC for configuration changes.

 

The CS-iTEC dew point sensor S 201 provides reliable and long term stable dew point monitoring in industrial applications.

The newly developed sensor features improved signal and stability in demanding industrial applications.
Drifts caused by temperature changes, dust and aging are eliminated by the electronics providing reliable measurements. Recalibration interval thus could be increased to 2 years.

Application

s200_2

Alarm adjustment at dew point sensor

Product features

  • Dew point sensor for low dew point applications dowto -60 ºC
  • Long term stability
  • Graphic display
  • Relay output
  • IP65 casing provides robust protection in rough industrial environment
  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1/2″ thread
  • High accuracy of ±2 ºC dew point

Technical data

Measuring range Dew point:            -60…+20 ºC
Relative humidity: 0…99.9%
Temperature:       -30…+70 ºC
Accuracy ±2 ºC dew point @ -50 ºC
Pressure range -0.1 … 5.0 MPa
Power supply 12 … 30 VDC / 100 mA
Ambient conditions -20 … 50 ºC
Response time t90 0…-40 ºC: 2 minutes
-40…0 ºC: 20 sec
Output signal 4…20 mA, 3-wire
Relay No,32 VDC, 500 mA
Connection 2xM12, 5 pole
Casing PC + ABS
Classification IP65
Process connection G 1/2″ thread (ISO 228/1)
UNF 5/8″ thread (on request)
Transport temperature -10 … +60 ºC

请留下您的询问,我们会尽快回复您。
姓名*  
公司名字  
询问物品  
产品数量  
电子邮件*  
联络号码*  
接收人姓名  
接收人地址  
附件  
*只支持 gif, jpeg, jpg, png, pdf
信息*  

转至手机版